Accredited Courses

Membership and CEng with EC The Institution supports educational bodies (Universities etc) running courses for the training of professional engineers by accrediting the courses that these bodies offer.

The course accreditation procedure involves a thorough assessment of the course documents, assessment procedures and teaching facilities by a panel of knowledge experts. The panel will also conduct separate meets with both lecturers and current students during the course of the assessment.

Accredited courses are fully supported by the Institution, and IED Student membership is free to full-time students for the duration of their studies. Successful students can upgrade to Member upon graduation.

The following courses have satisfied the IED accreditation criteria and further information can be obtained through the contacts below.

Anglia Ruskin University
Aston University
University of Bath
Bournemouth University
Bournemouth and Poole College
University of Brighton
University of Bristol
Brunel University London
Buckinghamshire New University
Cardiff Metropolitan University
University of Central Lancashire
Coventry University
Cranfield University
University of Derby
De Montfort University
Dublin Institute of Technology
University of East London
Edinburgh Napier University
University of Glamorgan
University of Glasgow
University of Glasgow (Singapore)
The Hong Kong Polytechnic University
Imperial College
Kingston University
University of Leeds
University of Limerick
Liverpool John Moores University
London South Bank University
Loughborough University, Design School
Loughborough University, Polymer and Minerals Engineering
Loughborough University, Wolfson School of Mechanical and Manufacturing Engineering
Manchester Metropolitan University
Middlesex University
New College Lanarkshire
Newbury College
The University of Nottingham
The University of Nottingham Malaysia
The University of Nottingham Ningbo China
The Nottingham Trent University
Open University
University of Plymouth
University of Portsmouth
Smallpeice Trust
Southampton Solent University
University of Strathclyde
University of Sussex
University of Swansea
University of West of England

Anglia Ruskin University

Anglia Ruskin University

School of Design and Communication Systems
Central Campus
Bishop Hall Lane
Chelmsford
Essex
CM1 1SQ
Tel: 01245 493131 ext 3067
Website: http://www.anglia.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs PT
BSc (Hons) Computer Aided Product Design 2002 - 2006 Membership J.S.Bowman@anglia.ac.uk
2 Yrs FT HND Computer Aided Product Design 2002 - 2006 Membership J.S.Bowman@anglia.ac.uk

Back to index

Aston University

Aston University

School of Engineering and Applied Science
Aston University
Aston Triangle
Birmingham
B4 7ET
Tel: 0121 204 3400
Website: http://www.aston.ac.uk/

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs SW
BSc (Hons) Industrial Product Design 2006 - 2022 Membership and RProdDes e.mackie2@aston.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Transport Product Design 2014 - 2022 Membership and RProdDes e.mackie2@aston.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Management 2014 - 2022 Membership and RProdDes e.mackie2@aston.ac.uk
1 Yr FT MSc Product Design 2018 - 2022 Membership and further learning towards CTPD
e.mackie2@aston.ac.uk
3 Yrs FT
4 Yrs SW
BEng (Hons) Design Engineering 2006 - 2018 Membership and partially meets the requirements for CEng registration e.mackie2@aston.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Automotive Product Design 2006 - 2013 Membership and RProdDes e.mackie2@aston.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Design Management 2006 - 2013 Membership and RProdDes e.mackie2@aston.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Engineering Product Design 2006 - 2013Membership and RProdDes e.mackie2@aston.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Medical Product Design 2006 - 2013 Membership and RProdDes e.mackie2@aston.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Sustainable Product Design 2010 - 2011 Membership and RProdDes e.mackie2@aston.ac.uk
1 Yr FT MSc Product Design Enterprise 2010 - 2018 Membership and further learning towards CEng registration e.mackie2@aston.ac.uk
1 Yr FT MSc Product Design Innovation 2009 - 2018 Membership and further learning towards CEng registration e.mackie2@aston.ac.uk

Back to index

University of Bath

Department/School of Mechanical Engineering

University of Bath

Bath

BA2 7AY


Tel: +44 (0)1225 388388
Website: http://www.bath.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs SW
BEng (Hons) Integrated Design Engineering 2014 – 2023 Membership and further learning towards CEng registration j.darling@bath.ac.uk
4 Yrs FT
5 Yrs SW
MEng (Hons) Integrated Design Engineering 2014 – 2023 Membership and CEng registration j.darling@bath.ac.uk




Back to index

Bournemouth University

Bournemouth University

The Faculty of Science & Technology
Department of Design and Engineering
Bournemouth University
Poole House
Talbot Campus
Poole
Dorset
BH12 5BB
Tel: 01202 961916
Website: http://www.bournemouth.ac.uk

Type Course Accreditation Award Course Contact
2 Yrs PT MEng (Hons) Engineering 2012 - 2023 Membership and CEng registration psewell@bournemouth.ac.uk

3 Yrs FT
4 Yrs SW

BEng (Hons) Mechanical Engineering 2016 - 2023 Membership and CEng registration psewell@bournemouth.ac.uk
BA (Hons) Product Design 1990 - 2013 Membership psewell@bournemouth.ac.uk
3 Yrs FT
4 Yrs SW
BA (Hons) Product Design 2014 - 2023 Membership and RProdDes psewell@bournemouth.ac.uk
3 Yrs FT
4 Yrs SW
BA (Hons) Industrial Design 2014 - 2018 Membership and RProdDes psewell@bournemouth.ac.uk
2 Yrs PT
3 Yrs FT
4 Yrs SW
BEng (Hons) Engineering 2012 - 2023 Membership, IEng registration and partially meets the further learning requirements towards CEng registration psewell@bournemouth.ac.uk
BSc (Hons) Product Design 1990 - 2013 Membership psewell@bournemouth.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design 2014 - 2023 Membership and RProdDes psewell@bournemouth.ac.uk
1 Yr FT
2 Yrs PT
BSc (Hons) Design Engineering (Top up) 2010 - 2023
Membership and IEng registration psewell@bournemouth.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Computer Aided Product Design now renamed 'BSc (Hons) Design Visualisation' 2005 - 2012 Membership and RProdDes psewell@bournemouth.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Design Engineering 2000 - 2006 Membership psewell@bournemouth.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Design Engineering 2006 - 2023 Membership and IEng registration psewell@bournemouth.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Advanced Technology Business Innovation 2010 - 2014 Membership and IEng registration psewell@bournemouth.ac.uk
2 Yrs FT Design Studies (Design Engineering Bridging Programme 2009 - 2015 Membership and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree level psewell@bournemouth.ac.uk
MDes Product Design 2015 - 2017 Membership and CTPD psewell@bournemouth.ac.uk
4 Yrs PT
4 Yrs FT
5 Yrs SW
MEng (Hons) Mechanical Engineering 2016 - 2023 Membership and CEng registration psewell@bournemouth.ac.uk
I Yr FT MSc Design Engineering 2010 - 2014 Membership and meets the further learning requirements towards CEng registration psewell@bournemouth.ac.uk
1 Yr FT MSc Engineering Design Innovation 2010 - 2014 Membership and meets the further learning requirements towards CEng registration psewell@bournemouth.ac.uk
1 Yr FT
2 Yrs PT
MSc Mechanical Engineering Design 2014 - 2023 Membership and meets the further learning requirements towards CEng registration psewell@bournemouth.ac.uk
MSc Product Design 2015 - 2017 Membership and CTPD psewell@bournemouth.ac.uk

Back to index

Bournemouth & Poole College

HE and Electronic Applied Computing, Faculty of Technology
North Road
Poole
Dorset
BH14 0LS

Tel: 01202 205205

Website: https://www.thecollege.co.uk/


Type Course Accreditation Award Course Contact
2 Yrs FT
3 Yrs PT
FdEng Engineering (Mechanical Design)
2014 - 2023
Membership, EngTech registration and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree level whitemj@bpc.ac.uk
2 Yrs FT
3 Yrs PT
FdEng Engineering (Manufacturing Management)
2014 - 2023
Membership, EngTech registration and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree level
whitemj@bpc.ac.uk
2 Yrs FT
3 Yrs PT
FdEng Engineering (Electronic Design) 2014 - 2023 Membership, EngTech registration and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree level whitemj@bpc.ac.uk
2 Yrs FT
3 Yrs PT
FdEng Engineering (Marine Technologies) 2018 - 2023 Membership, EngTech registration and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree level whitemj@bpc.ac.uk
2 Yrs FT
3 Yrs PT
FdSc Engineering (Mechanical Design) 2009 - 2018 Membership and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree level whitemj@bpc.ac.uk
2 Yrs FT
3 Yrs PT
FdSc Engineering (Manufacturing Management) 2009 - 2018 Membership and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree level whitemj@bpc.ac.uk
2 Yrs PT
1 Yr FT
HNC Engineering (Mechanical Design) 2014 - 2023 Membership and EngTech registration whitemj@bpc.ac.uk
2 Yrs PT
1 Yr FT
HNC Engineering (Manufacturing Management) 2014 - 2023 Membership and EngTech registration whitemj@bpc.ac.uk
2 Yrs PT
1 Yr FT
HNC Engineering (Electronic Design) 2014 - 2023 Membership and EngTech registration whitemj@bpc.ac.uk
2 Yrs PT
1 Yr FT
HNC Engineering (Marine Technologies) 2018 - 2023 Membership and EngTech registration whitemj@bpc.ac.uk


Back to index

University of Brighton

University of Brighton

Faculty of Science and Engineering
School of Engineering
Cockcroft Building
Lewes Road
Moulsecoomb
Brighton
East Sussex
BN2 4GJ
Tel: 01273 642300
Website: http://www.brighton.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT BSc (Hons) Product Design 2010 - 2022 Membership and RProdDes R.D.Morris@bton.ac.uk
4 Yrs FT BSc (Hons) Product Design with Professional Experience 2007 - 2022 Membership and RProdDes R.D.Morris@bton.ac.uk
3 Yrs FT BSc (Hons) Product Design Technology 2013 - 2022 Membership and RProdDes R.D.Morris@bton.ac.uk
4 Yrs FT BSc (Hons) Product Design Technology with Professional Experience 2008 - 2022 Membership and RProdDes R.D.Morris@bton.ac.uk
3 Yrs FT BSc (Hons) Sports Product Design 2013 - 2022 Membership and RProdDes R.D.Morris@bton.ac.uk
4 Yrs FT BSc (Hons) Sports Product Design with Professional Experience 2008 - 2022 Membership and RProdDes R.D.Morris@bton.ac.uk
3 Yrs FT BSc (Hons) Design Technology 2002 - 2006 Membership R.D.Morris@bton.ac.uk
3 Yrs FT BSc (Hons) Sports Technology 2002 - 2006 Membership R.D.Morris@bton.ac.uk
3 Yrs FT BSc (Hons) Sustainable Product Design 2007 - 2015 Membership and RProdDes R.D.Morris@bton.ac.uk
4 Yrs FT BSc (Hons) Sustainable Product Design with Professional Experience 2013 - 2015 Membership and RProdDes R.D.Morris@bton.ac.uk

Back to index

The University of Bristol

The University of Bristol

Faculty of Engineering
University Walk
Bristol
BS8 1TR
Tel: 0117 928 8108
Website: http://www.bris.ac.uk/engineering/

Type Course Accreditation Award Course Contact
3 Yrs FT BEng (Hons) Engineering Design 2008 - 2023 Membership and partially meets the further learning requirements towards CEng registration Paul.harper@bristol.ac.uk
4 Yrs SW BEng (Hons) Engineering Design with Study in Industry 2008 - 2023 Membership and partially meets the further learning requirements towards CEng registration Paul.harper@bristol.ac.uk
4 Yrs FT MEng (Hons) in Engineering Design 2008 - 2023 Membership and CEng registration Paul.harper@bristol.ac.uk
5 Yrs SW MEng (Hons) Engineering Design with Study in Industry 2001 - 2023 Membership and CEng registration Paul.harper@bristol.ac.uk

Back to index

Brunel University London

School of Engineering and Design
Uxbridge
Middlesex
UB8 3PH
Tel: 01895 265737
Website: http://www.brunel.ac.uk

Type Course Accreditation For Course Contact
3 Yrs FT
4 Yrs SW
BA Industrial Design and Technology 2001 - 2005 Membership Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT BA (Hons) Industrial Design and Technology 2006 - 2011 Membership Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT BA (Hons) Industrial Design and Technology 2012 - 2016 Membership and RProdDes Stuart-Gabrielson@brunel.ac.uk
4 Yrs SW BA (Hons) Industrial Design and Technology with Professional Practice 2012 - 2016 Membership Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT
4 Yrs SW
BSc Industrial Design 2001 - 2005 Membership Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Industrial Design 2006 - 2011 Membership and RProdDes Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT
4 Yrs SW
BSc Industrial Design Engineering 2001 - 2005 Membership Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT
4 Yrs SW
BSc Product Design 2001 - 2005 Membership Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT BSc (Hons) Product Design 2006 - 2011 Membership and RProdDes Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT BSc (Hons) Product Design 2012 - 2016 Membership and RProdDes Stuart-Gabrielson@brunel.ac.uk
4 Yrs SW BSc (Hons) Product Design with Professional Practice 2012 - 2016 Membership and RProdDes Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT
4 Yrs SW
BSc Virtual Product Design 2004 - 2008 Membership and RProdDes
Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT BSc Product Design Engineering 2006 - 2011 Membership and RProdDes Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT BSc Product Design Engineering 2012 - 2016 Membership and RProdDes Stuart-Gabrielson@brunel.ac.uk
4 Yrs SW BSc (Hons) Product Design Engineering with Professional Practice 2012 - 2016 Membership and RProdDes Stuart-Gabrielson@brunel.ac.uk
1 Yr FT
3 Yrs PT
MA Design and branding Strategy 2012 Membership Stuart-Gabrielson@brunel.ac.uk
1 Yr FT
3 Yr PT
MA Design Strategy and Innovation 2012 Membership Stuart-Gabrielson@brunel.ac.uk
3 Yrs FT
4 Yrs SW
MEng Mechanical Engineering and Design 2001 - 2005 Membership Stuart-Gabrielson@brunel.ac.uk
1 Yr FT
2-4 Yrs PT
MSc Human Centred Design 2009 - 2011 Membership Stuart-Gabrielson@brunel.ac.uk
1 Yr FT
2-4 Yrs PT
MSc Integrated Product Design 2009 - 2011 Membership Stuart-Gabrielson@brunel.ac.uk
1 Yr FT
2-4 Yrs PT
MSc Integrated Product Design 2012 - 2016 Membership Stuart-Gabrielson@brunel.ac.uk
4 Yrs FT/SW BA (Hons) Industrial Design and Technology 2017 - 2021 Membership, RProdDes and partially meets the requirements for CTPD Stuart-Gabrielson@brunel.ac.uk
4 Yrs FT/SW BA (Hons) Industrial Design and Technology (with professional experience) 2017 - 2021 Membership, RProdDes and partially meets the requirements for CTPD Stuart-Gabrielson@brunel.ac.uk
4 Yrs FT/SW BSc (Hons) Product Design 2017 - 2021 Membership, RProdDes and partially meets the requirements for CTPD Stuart-Gabrielson@brunel.ac.uk
4 Yrs FT/SW BSc (Hons) Product Design (with professional experience) 2017 - 2021 Membership, RProdDes and partially meets the requirements for CTPD Stuart-Gabrielson@brunel.ac.uk
4 Yrs FT/SW BSc (Hons) Product Design Engineering 2017 - 2021 Membership, RProdDes and partially meets the requirements for CTPD Stuart-Gabrielson@brunel.ac.uk
4 Yrs FT/SW BSc (Hons) Product Design Engineering (with professional experience) 2017 - 2021 Membership, RProdDes and partially meets the requirements for CTPD Stuart-Gabrielson@brunel.ac.uk
4 Yrs FT/SW MSc Integrated Product Design 2017 - 2021 Membership and CTPD Stuart-Gabrielson@brunel.ac.uk
Back to index

Buckinghamshire New University

Buckinghamshire New University

Faculty of Design, Media & Management
Queen Alexandra Road
High Wycombe
HP11 2JZ
Tel: 01494 605 067
Website: http://www.bcuc.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT BA (Hons) Product Design 2009 - 2013 Membership and RProdDes Lyndon.buck@bucks.ac.uk
3 Yrs FT BA (Hons) Product Design 2014 - 2018 Membership and RProdDes Lyndon.buck@bucks.ac.uk
3 Yrs PT BEng (Hons) Mechanical Engineering Design 2002 - 2008 Membership and IEng registration Lyndon.buck@bucks.ac.uk
3 Yrs PT BEng (Hons) Mechanical Engineering Design 2009 - 2013 Membership and IEng registration Lyndon.buck@bucks.ac.uk
3 Yrs PT BEng (Hons) Mechanical Engineering Design 2002 - 2014 Membership, IEng registration and partially meets the requirements for CEng registration Lyndon.buck@bucks.ac.uk
3 Yrs PT BEng (Hons) Mechanical Engineering Design 2015 - 2020 Membership and IEng registration Lyndon.buck@bucks.ac.uk
3 Yrs FT BSc (Hons) Computer Aided Design 2002 - 2007 Membership and IEng registration Lyndon.buck@bucks.ac.uk
3 Yrs FT
BSc (Hons) Product Design 2002 - 2007 Membership and IEng registration Lyndon.buck@bucks.ac.uk
3 Yrs FT
BSc (Hons) Computer Aided Design with Computing 2002 - 2007 Membership and IEng registration Lyndon.buck@bucks.ac.uk
3 Yrs FT
BSc (Hons) Computer Aided Design with Multimedia 2002 - 2007 Membership and IEng registration Lyndon.buck@bucks.ac.uk
3 Yrs FT
BSc (Hons) Product Design with Multimedia 2002 - 2007 Membership and IEng registration Lyndon.buck@bucks.ac.uk
3 Yrs FT BSc (Hons) Product Design 2009 - 2013 Membership and RProdDes Lyndon.buck@bucks.ac.uk
3 Yrs FT BSc (Hons) Product Design 2014 - 2018 Membership and RProdDes Lyndon.buck@bucks.ac.uk
3 Yrs PT FDSc Engineering (Mechanical Engineering) 2009 - 2013 Membership, EngTech registration and partially meets the requirements for IEng registration Lyndon.buck@bucks.ac.uk
2 Yrs PT HNC Mechanical Engineering Design 2010 - 2013 Membership and EngTech registration Lyndon.buck@bucks.ac.uk
4 Yrs PT MEng Mechanical Engineering Design 2008 - 2013 Membership and CEng registration Lyndon.buck@bucks.ac.uk
1 Yr FT MSc Engineering Management and Design 2009 - 2013 Membership with further learning towards CEng registration Lyndon.buck@bucks.ac.uk
4-6 Yrs PT BEng (Hons) Engineering Design (Mechanical Enginering) 2017 - 2021 Membership and IEng registration Lyndon.buck@bucks.ac.uk
4-6 Yrs PT BEng (Hons) Engineering Design (Electrical Engineering) 2017 - 2021 Membership and IEng registration (subject to output as not yet delivered) Lyndon.buck@bucks.ac.uk
4-6 Yrs PT BEng (Hons) Engineering Design (Production Engineering) 2017 - 2021 Membership and IEng registration (subject to output as not yet delivered) Lyndon.buck@bucks.ac.uk

Back to index

Cardiff Metropolitan University

Cardiff Metropolitan University

School of Product and Engineering Design
Western Avenue
Cardiff
CF5 2YB
Tel: 02920 416070
Website: www.cardiffmet.co.uk

Type Course Accreditation Award Course Contact
3 Yrs FT/PT BA (Hons) Product Design 2010 - 2021 Membership and RProdDes

cwatkins@cardiffmet.ac.uk

3 Yrs FT/PT BSc (Hons) Product Design 2010 - 2021 Membership and RProdDes cwatkins@cardiffmet.ac.uk

1 Yr FT
2 Yrs PT

MSc Product Design 2019 - 2023 Membership and further learning towards CTPD cwatkins@cardiffmet.ac.uk
3 Yrs FT BSc (Hons) Computer Aided Product Design 2002 - 2009 Membership cwatkins@cardiffmet.ac.uk
3 Yrs FT BA (Hons) Multimedia Product Design 2002 - 2009 Membership and RProdDes cwatkins@cardiffmet.ac.uk
3 Yrs FT
6 Yrs PT
BA (Ord) Product Design 2010 - 2011 Membership and RProdDes cwatkins@cardiffmet.ac.uk
3 Yrs FT
6 Yrs PT
BSc (Ord) Product Design 2010 - 2011 Membership and RProdDes cwatkins@cardiffmet.ac.uk
3 Yrs FT BSc (Hons) Product Design and Technology (Mechanics and Electronics) 2002 - 2004 Membership cwatkins@cardiffmet.ac.uk

Back to index


University of Central Lancashire

Department of Technology
Preston
PR1 2HE
Tel: 01772 893311
Website: http://www.uclan.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT BEng (Hons) Computer Aided Engineering 2006 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration cenquiries@uclan.ac.uk
4 Yrs SW BEng (Hons) Computer Aided Engineering with Industrial Placement 2006 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration cenquiries@uclan.ac.uk
3 Yrs FT BEng (Hons) Mechanical Engineering 2013 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration cenquiries@uclan.ac.uk
4 Yrs SW BEng (Hons) Mechanical Engineering with Industrial Placement 2013 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration cenquiries@uclan.ac.uk
3 Yrs FT BEng (Hons) Motor Sports Engineering 2006 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration cenquiries@uclan.ac.uk
4 Yrs SW BEng (Hons) Motor Sports Engineering with Industrial Placement 2006 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration cenquiries@uclan.ac.uk
3 Yrs FT BEng (Hons) Engineering Development 2011 - 2015 Membership, IEng registration and partially meets the requirements for CEng registration cenquiries@uclan.ac.uk
4 Yrs SW BEng (Hons) Engineering Development with Industrial Placement 2011 - 2015 Membership, IEng registration and partially meets the requirements for CEng registration cenquiries@uclan.ac.uk
4 Yrs FT MEng (Hons) Computer Aided Engineering 2006 - 2020 Membership and CEng registration cenquiries@uclan.ac.uk
5 Yrs SW MEng (Hons) Computer Aided Engineering with Industrial Placement 2006 - 2020 Membership and CEng registration cenquiries@uclan.ac.uk
4 Yrs FT MEng (Hons) Mechanical Engineering 2013 - 2020 Membership and CEng registration cenquiries@uclan.ac.uk
5 Yrs SW MEng (Hons) Mechanical Engineering with Industrial Placement 2013 - 2020 Membership and CEng registration cenquiries@uclan.ac.uk
4 Yrs FT MEng (Hons) Motor Sports Engineering 2006 - 2020 Membership and CEng registration cenquiries@uclan.ac.uk
5 Yrs SW MEng (Hons) Motor Sports Engineering with Industrial Placement 2006 - 2020 Membership and CEng registration cenquiries@uclan.ac.uk
4 Yrs FT MEng (Hons) Engineering Development 2011 - 2015 Membership and CEng registration cenquiries@uclan.ac.uk
5 Yrs SW MEng (Hons) Engineering Development with Industrial Placement 2011 - 2015 Membership and CEng registration cenquiries@uclan.ac.uk

Back to index

Coventry University

Coventry University

Maurice Foss Building
School of Engineering
Priory Street
Coventry
CV1 5FB
Tel: 024 7683 8363
Website: http://www.coventry.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT MDes/BSc (Hons) Industrial Product Design 2000 - 2009 Membership Kieran Mason arx245@coventry.ac.uk

Back to index

Cranfield University

College Rd
Cranfield
Bedfordshire
MK43 0AL
Tel: 01234 750111
Website: https://www.cranfield.ac.uk/

Type Course Accreditation Award Course Contact

1 Yr FT
up to 5 Yrs PT

MSc Global Product Development & Management 2012 - 2018 CEng with further learning

f.j.charnley@cranfield.ac.uk

Back to index

University of Derby

University of Derby

Faculty of Arts, Design and Technology
University of Derby
Markeaton Street
Derby
DE22 3AW
Tel: 01332 593138
Fax: 01332 597760
Website: http://www.derby.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FTBA (Hons) Product Design 2006 - 2020 Membership and RProdDes m.veveris@derby.ac.uk
3 Yrs FTBSc (Hons) Product Design Engineering 2016 - 2020 Membership and RProdDes m.veveris@derby.ac.uk
3 Yrs FTBSc (Hons) Design Technology 2006 - 2010 Membership and RProdDes m.veveris@derby.ac.uk
3 Yrs FTBSc (Hons) Product Design 2011 - 2015 Membership and RProdDes m.veveris@derby.ac.uk
3 Yrs FTBSc (Hons) Product Design, Innovation & Marketing 2006 - 2010 Membership and RProdDes m.veveris@derby.ac.uk

Back to index

De Montfort University

De Montfort University

Faculty of Art and Design
Mill Lane
Fletcher Building
The Gateway
Leciester
LE1 9BH
Tel: 0116 255 1551
Fax: 0116 257 7052
Website: http://www.dmu.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs SW
BA (Hons) Furniture Design 2013 - 2017 Membership and RProdDes smlawson@dmu.ac.uk

3 Yrs FT
4 Yrs SW
BA (Hons) Product Design & Furniture Design 2013 - 2022 Membership and RProdDes smlawson@dmu.ac.uk
3 Yrs FT
4 Yrs SW
BA (Hons) Product Design 2013 - 2022 Membership and RProdDes smlawson@dmu.ac.uk
4 Yrs SW
8 Yrs PT
BSc (Hons) Industrial Design (Engineering) 1997 - 2001 Membership pbford@dmu.ac.uk
4 Yrs SW
8 Yrs PT
BSc (Hons) Industrial Design 2002 - 2007 Membership and RProdDes pbford@dmu.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design 2008 - 2022 Membership, IEng registration and ProdDes pbford@dmu.ac.uk
3 Yrs FT
4 Yrs SW
MDes Design Products 2013 - 2022 Membership and RProdDes smlawson@dmu.ac.uk

Back to index

Dublin Institute of Technology

School of Manufacturing and Design Engineering
Bolton Street
Dublin 1
IRELAND
Tel: +33 1-402 3627
Website: http://www.dit.ie

Type Course Accreditation Award Course Contact
4 Yrs FT BSc (Hons) Product Design 2003 - 2021 Membership and RProdDes ger.reilly@dit.ie

Back to index

University of East London

University of East London

School of Computing and Technology
Docklands Campus
4-6 University Way
London
E16 2RD
Tel: 020 8590 7722
Website: http://www.uel.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design 1998 - 2005 Membership a.j.slawson@uel.ac.uk

Back to index

Edinburgh Napier University

School of Engineering and Built Environment 42 Colinton Road
Edinburgh
EH10 5BT
Tel: 0333 900 6040
Website: http://www.napier.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT BDes (Hons) Consumer Product Design 2005 - 2009 Membership j.shackleton@napier.ac.uk
4 Yrs FT BSc/BSc (Hons) Product Design Engineering 2002 - 2007 Membership and IEng registration j.shackleton@napier.ac.uk
3 Yrs FT BSc Industrial Design 2001 - 2004 Membership j.shackleton@napier.ac.uk
3 Yrs FT BSc Product Design Engineering 2008 - 2013 Membership and RProdDes j.shackleton@napier.ac.uk
3 Yrs FT BSc Product Design Engineering 2014 - 2015 Membership and RProdDes j.shackleton@napier.ac.uk
4 Yrs FT BSc (Hons) Product Design Engineering 2008 - 2013 Membership and IEng registration j.shackleton@napier.ac.uk
4 Yrs FT BSc (Hons) Product Design Engineering 2014 - 2015 Membership and IEng registration j.shackleton@napier.ac.uk

Back to index

University of Glamorgan

University of Glamorgan

Division of Design
Pontypridd
South Wales
Tel: 01443 482875
Website: http://www.glam.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs SW
BA (Hons) Product Design 2002 - 2006 Membership jhills@glam.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design 2002 - 2006 Membership jhills@glam.ac.uk

Back to index

University of Glasgow

University of Glasgow
Dept of Mechanical Engineering
Glasgow
G12 8QQ
Tel: +44(0)141 330 2000
Website: www.gla.ac.uk

Type Course Accreditation Award Course Contact
4 Yrs FT BEng Mechanical Design Engineering 2006 - 2019 Membership, IEng registration and partially meets the requirements for CEng registration c.whittet@gsa.ac.uk
4 Yrs FT BEng (Hons) Product Design Engineering 2006 - 2019 Membership, IEng registration and partially meets the requirements for CEng registration c.whittet@gsa.ac.uk
5 Yrs FT MEng (Hons) Mechanical Design Engineering 2005 - 2019 Membership and CEng registration c.whittet@gsa.ac.uk
5 Yrs FT MEng (Hons) Product Design Engineering 2005 - 2019 Membership and CEng registration c.whittet@gsa.ac.uk
1 Yr FT MSc Product Design Engineering 2014 - 2019 Membership and further learning towards CEng registration c.whittet@gsa.ac.uk

Back to index

University of Glasgow (Singapore)

University of Glasgow (Singapore)
535 Clementi Road
Blk 47 #05-01
Ngee Ann Polytechnic
Singapore
599489
Tel: + 65 6460 7822
Email: Singapore-eng-NP@glasgow.ac.uk

Type Course Accreditation Award Course Contact
4 Yrs FT BEng (Hons) Mechanical Design Engineering 2011 - 2022 Membership and partially meets the requirements for CEng registration Fannon.Lim@glasgow.ac.uk

Back to index

The Hong Kong Polytechnic University

The Hong Kong Polytechnic University

Department of Mechanical Engineering
Hung Hom
Kowloon
Hong Kong
Tel: +852 2766 6643
Fax: +852 2365 4703
Website: http://www.polyu.edu.hk

Type Course Accreditation Award Course Contact
3 Yrs FT (05003) BEng (Hons) Product Analysis and Engineering Design previously BEng (Hons) Product Analysis with Design 2005 - 2012 Membership, IEng registration and partially meets the requirements for CEng registration mmcwl@polyu.edu.hk
4 Yrs PT (43094) BEng (Hons) Product Analysis and Engineering Design previously BEng (Hons) Product Analysis with Design 2005 - 2012 Membership, IEng registration and partially meets the requirements for CEng registration mmcwl@polyu.edu.hk
4 Yrs PT (43092) BSc (Hons) Product Design with Analysis 2000 - 2005 Membership and CEng registration with additional learning mmcwl@polyu.edu.hk

Back to index

Imperial College

Imperial College

Dyson School of Design Engineering
Imperial College London
10 Princes Gardens
South Kensington
London
SW7 1NA
Tel: +44 (0) 20 7594 8888
Website: https://www.imperial.ac.uk/design-engineering/

Type Course Accreditation Award Course Contact
4 Yrs FT
MEng Design Engineering 2015 - 2020 Membership and CEng registration m.ghajari@imperial.ac.uk
3 Yrs FT BEng Biomedical Engineering 2018 - 2023 Membership and partially meets the requirements for CEng registration m.ghajari@imperial.ac.uk
4 Yrs FT MEng Biomedical Engineering 2018 - 2023 Membership and CEng registration m.ghajari@imperial.ac.uk
5 Yrs FT MEng Biomedical Engineering with a Year in Industry 2018 - 2023 Membership and CEng registration m.ghajari@imperial.ac.uk
5 Yrs FT MEng Biomedical Engineering with a Year Abroad 2018 - 2023 Membership and CEng registration m.ghajari@imperial.ac.uk
1 Yr FT MSc Biomedical Engineering 2018 - 2023 Membership and CEng registration with additional learning m.ghajari@imperial.ac.uk
3 Yrs FT BEng Molecular Bioengineering 2018 - 2023 Membership and partially meets the requirements for CEng registration m.ghajari@imperial.ac.uk
4 Yrs FT MEng Molecular Bioengineering 2018 - 2023 Membership and CEng registration m.ghajari@imperial.ac.uk
5 Yrs FT MEng Molecular Bioengineering with a year in Industry 2018 - 2023 Membership and CEng registration m.ghajari@imperial.ac.uk
5 Yrs FT MEng Molecular Bioengineering with a Year Abroad 2018 - 2023 Membership and CEng registration m.ghajari@imperial.ac.uk
1 Yr FT Msc Human and Biological Robotics 2018 - 2023 Membership and CEng registration with additional learning m.ghajari@imperial.ac.uk
1 Yr FT MRes Medical Device Design and Entrepreneurship 2018 - 2023 Membership and CEng registration with additional learning m.ghajari@imperial.ac.uk
1 Yr FT MRes Bioengineering 2018 - 2023 Membership and CEng registration with additional learning m.ghajari@imperial.ac.uk
1 Yr FT MRes Meurotechnology 2018 - 2023 Membership and CEng registration with additional learning m.ghajari@imperial.ac.uk


Back to index

Kingston University

Kingston University

Faculty of Engineering
Kingston University
Roehampton Vale Centre
Friars Avenue
London
SW15 3DW
Tel: 020 8547 7704
Website: http://www.kingston.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs SW
BEng (Hons) Mechanical Engineering 2004 - 2008 Membership, IEng registration and partially meets the requirements for CEng registration a.ordys@kingston.ac.uk
4 Yrs FT
5 Yrs SW
BEng (Hons) Mechanical Engineering with Foundation Year 2004 - 2008 Membership, IEng registration and partially meets the requirements for CEng registration a.ordys@kingston.ac.uk
4 Yrs FT
5 Yrs SW
MEng Mechanical Engineering 2004 - 2008 Membership and CEng registration a.ordys@kingston.ac.uk

Back to index

University of Leeds


https://www.leeds.ac.uk/

University of Leeds
Woodhouse Lane
Leeds
LS2 9JT
Tel: 0113 243 1751
Website: http://www.leeds.ac.uk/

Type Course Accreditation Award Course Contact
3 Yrs FT
BSc Product Design 2014 - 2020 Membership, RProdDes and IEng registration d.b.trowsdale@leeds.ac.uk
4 Yrs FT
BSc Product Design (International) 2014 - 2020 Membership, RProdDes and IEng registration d.b.trowsdale@leeds.ac.uk
4 Yrs FT BSc Product Design (Industrial) 2014 - 2020 Membership, RProdDes and IEng registration d.b.trowsdale@leeds.ac.uk
3 Yrs FT BDes Product Design 2012 - 2017 Membership, RProdDes and IEng registration d.b.trowsdale@leeds.ac.uk
4 Yrs FT BDes Product Design (International) 2012 - 2017 Membership, RProdDes and IEng registration d.b.trowsdale@leeds.ac.uk
4 Yrs FT BDes Product Design (Industrial) 2012 - 2017 Membership, RProdDes and IEng registration d.b.trowsdale@leeds.ac.uk
4 Yrs FT MDes Product Design 2012 - 2020 Membership and CTPD d.b.trowsdale@leeds.ac.uk
5 Yrs FT MDes Product Design (International) 2012 - 2020 Membership and CTPD d.b.trowsdale@leeds.ac.uk
5 Yrs FT MDes Product Design (Industrial) 2012 - 2020 Membership and CTPD d.b.trowsdale@leeds.ac.uk

Back to index

University of Limerick

Castletroy
County Limerick
Ireland
Tel: +353 61 202 700
Website: http://www.ul.ie

Type Course Accreditation Award Course Contact
4 Yrs FT BSc (Hons) Product Design &Technology 2010 - 2018 Membership and RProdDes Muireann.McMahon@ul.ie

Back to index

Liverpool John Moores University

Liverpool John Moores University

70 Mount Pleasant
Liverpool
Merseyside
L3 5UA

Tel: 0151 231 2121
Website: https://www.ljmu.ac.uk/

Type Course Accreditation Award Course Contact
3 Yrs FT BSc (Hons) Product Innovation & Development 2011 - 2018 Membership and RProdDes A.Papworth@ljmu.ac.uk
3 Yrs FT BSc (Hons) Computer Aided Design 2011 - 2018 Membership and RProdDes A.Papworth@ljmu.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design Engineering 2014 - 2022 Membership and IEng registration A.Papworth@ljmu.ac.uk

Back to index

London South Bank University

London South Bank University

School of Engineering
Division of Engineering and Design
103 Borough Road
London
SE1 0AA
Tel: 0800 923 88 88
Website: www.lsbu.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design 2006 - 2013 Membership and RProdDes forkesa@lsbu.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design 2013 - 2019 Membership, RProdDes and partially meets the requirements for CTPD forkesa@lsbu.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Engineering Product Design 2001 - 2019 Membership, RProdDes and partially meets the requirements for CTPD

lishmanb@lsbu.ac.uk

3 Yrs FT
4 Yrs SW
BSc (Hons) Engineering Product Design 2015 - 2019 IEng registration

lishmanb@lsbu.ac.uk

3 Yrs FT
4 Yrs SW
BSc (Hons) Industrial Design 2001 - 2005 Membership forkesa@lsbu.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Sports Product Design 2001 - 2010 Membership and RProdDes forkesa@lsbu.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and The Environment 2003 - 2010 Membership and RProdDes forkesa@lsbu.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design Computing 2003 - 2010 Membership and RProdDes forkesa@lsbu.ac.uk
1 Yr FT
2 Yrs PT
MSc Engineering Product Design 2001 - 2005 Membership forkesa@lsbu.ac.uk

Back to index

Loughborough University

Loughborough University

Loughborough Design School
Loughborough University
Leicestershire
LE11 3TU

Tel: 01509 228323
Website: http://www.lboro.ac.uk/departments/lds

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs SW
BA (Hons) Industrial Design and Technology 2011 - 2020 Membership and RProdDes j.r.mccardle@lboro.ac.uk
3 Yrs FT
4 Yrs SW
BA (Hons) Industrial Design and Technology with a Diploma in Professional Studies 2011 - 2020 Membership and RProdDes j.r.mccardle@lboro.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Industrial Design and Technology 2003 - 2005 Membership and IEng registration j.r.mccardle@lboro.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Technology 2006 - 2015 Membership and IEng registration j.r.mccardle@lboro.ac.uk
3 Yrs FT
4 Yrs SW
BA (Hons) Industrial Design and Technology with a Diploma in Professional Studies 2006 - 2015 Membership and IEng registration j.r.mccardle@lboro.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Technology 2016 - 2020 Membership and RProdDes j.r.mccardle@lboro.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Technology with a Diploma in Professional Studies 2016 - 2020 Membership and RProdDes j.r.mccardle@lboro.ac.uk

Back to index

Loughborough University

Loughborough University

Institute of Polymer Technology and
Minerals Engineering
Loughborough
Leicestershire
LE11 3TU
Tel: +44 (0)1509 223331
Website: http://www.lboro.ac.uk/departments/iptme/

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs SW
BSc (Hons) Applied Design 2003 - 2006 Membership s.n.b.hodgson@lboro.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) 3F Design with Engineering Materials 2006 - 2008 Membership and RProdDes H.Wu2@lboro.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Design with Engineering Materials 2009 - 2013 Membership and RProdDes H.Wu2@lboro.ac.uk


Back to index

Loughborough University

Loughborough University

Wolfson School of Mechanical and
Manufacturing Engineering
Loughborough
Leicestershire
LE11 3TU
Tel: +44 (0)1509 223331
Website: http://www.lboro.ac.uk/departments/MM/

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs SW
BEng (Hons) Product Design Engineering 2010 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration mmadmissions@lboro.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Sports Technology 2015 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration mmadmissions@lboro.ac.uk
4 Yrs FT
5 Yrs SW
MEng (Hons) Product Design Engineering 2010 - 2020 Membership and CEng registration mmadmissions@lboro.ac.uk
1 Yr FT
up to 8 Yrs PT
MSc Advanced Manufacturing Engineering & Management 2016 - 2020 Membership and meets the further learning requirements for CEng registration mmadmissions@lboro.ac.uk
1 Yr FT
up to 8 Yrs PT
MSc Sustainability Engineering 2010 - 2020 Membership and meets the further learning requirements for CEng registration mmadmissions@lboro.ac.uk
1 Yr FT
up to 8 Yrs PT
MSc Engineering Design 2010 - 2020 Membership and meets the further learning requirements for CEng registration mmadmissions@lboro.ac.uk
1 Yr FT
up to 8 Yrs PT
MSc Engineering Design and Manufacture 2010 - 2015 Membership and meets the further learning requirements for CEng registration mmadmissions@lboro.ac.uk
1 Yr FT
up to 8 Yrs PT
MSc Mechanical Engineering 2010 - 2020 Membership and meets the further learning requirements for CEng registration mmadmissions@lboro.ac.uk


Back to index

Manchester Metropolitan University

Manchester Metropolitan University

Manchester Metropolitan University

All Saints Building
All Saints
Manchester
M15 6BH
Tel: 0161 247 2000
Website: https://www2.mmu.ac.uk/

Type Course Accreditation Award Course Contact
3 Yrs FT BSc (Hons) Design Engineering 2015 - 2021 Membership and IEng registration s.sashikumar@mmu.ac.uk
4 Yrs SW BSc (Hons) Design Engineering 2015 - 2021 Membership and IEng registration s.sashikumar@mmu.ac.uk
3 Yrs FT BSc (Hons) Product Design and Technology 2015 - 2021 Membership and IEng registration s.sashikumar@mmu.ac.uk
4 Yrs SW BSc (Hons) Product Design and Technology 2015 - 2021 Membership and IEng registration s.sashikumar@mmu.ac.uk

Back to index


Middlesex University

Middlesex University

Middlesex University

Product Design and Engineering
School of Engineering and Information Sciences.
Trent Park Campus
Bramley Road
London
N14 4YZ
Tel: 020 8411 5683
Website: http://www.mdx.ac.uk/courses/undergraduate/product_design_engineering

Type Course Accreditation Award Course Contact
3 Yrs FT BA (Hons) Design and Technology 2001 - 2005 Membership a.bardill@mdx.ac.uk
3 Yrs FT
5/8 Yrs PT
BA (Hons) Product Design 2012 - 2016 Membership and RProdDes m.karananoglu@mdx.ac.uk
3 Yrs FT
4 Yrs SW
6 Yrs PT
BSc (Hons) Engineering Product Design 2004 - 2007 Membership and IEng registration w.griffiths@mdx.ac.uk
3 Yrs FT
5/8 Yrs PT
BSc (Hons) Product Design 2012 - 2016 Membership and RProdDes m.karananoglu@mdx.ac.uk
3 Yrs FT
4 Yrs SW
6 Yrs PT
BSc (Hons) Product Design and Robotics 2008 - 2012 Membership and IEng registration w.griffiths@mdx.ac.uk
3 Yrs FT
MDes Product Design Innovation and Management
2004 - 2006
Membership
P.Fossick@mdx.ac.uk
1 Yr
MSc in Interaction Design 2007 - 2011 Membership b.fields@mdx.ac.uk
1 Yr MSc Design Engineering 2007 - 2011 Membership and partially meets the requirements for CEng registration s.prior@mdx.ac.uk
3 Yrs FT
4 Yrs SW
BA Product Design 2012 - 2021 Membership and RProdDes m.karananoglu@mdx.ac.uk
3 Yrs FT
4 Yrs SW
BEng (Hons) Electronic Engineering 2017 - 2021 Membership and partially meets the requirements for CEng registration m.karananoglu@mdx.ac.uk
3 Yrs FT
4 Yrs SW
BEng (Hons) Design Engineering 2017 - 2021 Membership and partially meets the requirements for CEng registration m.karananoglu@mdx.ac.uk
3 Yrs FT
4 Yrs SW
BEng (Hons) Robotics 2017 - 2021 Membership and partially meets the requirements for CEng registration m.karananoglu@mdx.ac.uk
3 Yrs FT
4 Yrs SW
BEng (Hons) Mechatronics 2017 - 2021 Membership and partially meets the requirements for CEng registration m.karananoglu@mdx.ac.uk
3 Yrs FT
4 Yrs SW
5 Yrs PT
BEng (Hons) Biomedical Engineering 2015 - 2021 Membership and partially meets the requirements for CEng registration m.karananoglu@mdx.ac.uk
4 Yrs FT
5 Yrs SW
6 Yrs PT
MEng (Hons) Biomedical Engineering 2015 - 2021 Membership and CEng registration m.karananoglu@mdx.ac.uk

Back to index

New College Lanarkshire

New College Lanarkshire

1 Enterprise Way,
Motherwell,
ML1 2TX
Tel: 01698 232323
Website: http://www.nclanarkshire.ac.uk

Type Course Accreditation Award Course Contact
2 Yrs FT HNC/HND CADD 2002 - 2006 Membership barry.skea@nclan.ac.uk
2 Yrs FT HND Computer Aided Draughting and Design 2013 - 2017 Membership barry.skea@nclan.ac.uk

Back to index

Newbury College

Monks Lane
Newbury
RG14 7TD

Tel: 01635 845000
Website: www.newbury-college.ac.uk

Type Course ACcreditation Award Course Contact
2 Yrs PT HNC Electronic Engineering 2009 - 2014 Membership and EngTech registration info@newbury-college.ac.uk
PT HNC Electronic Engineering 2015 - 2019 Membership and EngTech registration info@newbury-college.ac.uk
2 Yrs PT HNC Mechanical Engineering 2009 - 2014 Membership and EngTech registration info@newbury-college.ac.uk
PT HNC Mechanical Engineering 2015-2019 Membership and EngTech registration info@newbury-college.ac.uk
2 Yrs PT HND Mechanical Engineering 2009 - 2014 Membership and partially meets the requirements for IEng registration subject to further appropriate learning to degree level info@newbury-college.ac.uk
PT HND Mechanical Engineering 2015 - 2019 Membership and partially meets the requirements for IEng registration and further learning towards CEng registration info@newbury-college.ac.uk
Back to index

The University of Nottingham

The University of Nottingham

Faculty of Engineering
School of Mechanical, Materials and Manufacturing Engineering
The University of Nottingham
University Park
Nottingham
NG7 2RD
Tel: 0115 951 3830
Website: http://www.engineering.nottingham.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT BEng (Hons) Product Design and Manufacture 2008 - 2022 Membership, IEng registration and partially meets the requirements for CEng registration stephen.pickering@nottingham.ac.uk
4 Yrs SW BEng (Hons) Product Design and Manufacture including an Industrial Year 2016 - 2022 Membership, IEng registration and partially meets the requirements for CEng registration stephen.pickering@nottingham.ac.uk
3 Yrs FT BEng (Hons) Product Design and Manufacture including an Integrated Study Abroad Year 2017 - 2022 Membership, IEng registration and partially meets the requirements for CEng registration stephen.pickering@nottingham.ac.uk
3 Yrs FT BEng (Hons) Mechanical Engineering 2003 - 2022 Membership, IEng registration and partially meets the requirements for CEng registration stephen.pickering@nottingham.ac.uk
4 Yrs SW BEng (Hons) Mechanical Engineering including an Industrial Year 2018 - 2022 Membership, IEng registration and partially meets the requirements for CEng registration stephen.pickering@nottingham.ac.uk
3 Yrs FT BEng (Hons) Mechanical Engineering including an Integrated Study Abroad Year 2018 - 2022 Membership, IEng registration and partially meets the requirements for CEng registration stephen.pickering@nottingham.ac.uk
3 Yrs FT BEng (Hons) Design Engineering 2008 - 2017 Membership, IEng registration and partially meets the requirements for CEng registration stephen.pickering@nottingham.ac.uk
4 Yrs FT MEng (Hons) Product Design and Manufacture 2008 - 2022 Membership and CEng registration stephen.pickering@nottingham.ac.uk
5 Yrs SW MEng (Hons) Product Design and Manufacture including an Industrial Year 2016 - 2022 Membership and CEng registration stephen.pickering@nottingham.ac.uk
4 Yrs FT MEng (Hons) Product Design and Manufacture including an Integrated Study Abroad Year 2017 - 2022 Membership and CEng registration stephen.pickering@nottingham.ac.uk
4 Yrs FT MEng (Hons) Design Engineering 2008 - 2017 Membership and CEng registration stephen.pickering@nottingham.ac.uk
4 Yrs FT MEng (Hons) Mechanical Engineering 2003 - 2022 Membership and CEng registration stephen.pickering@nottingham.ac.uk
5 Yrs SW MEng (Hons) Mechanical Engineering including an Industrial Year 2015 - 2022 Membership and CEng registration stephen.pickering@nottingham.ac.uk
4 Yrs FT MEng (Hons) Mechanical Engineering including an Integrated Study Aboard Year 2018 - 2022 Membership and CEng registration stephen.pickering@nottingham.ac.uk
Back to index

The University of Nottingham, Malaysia Campus

The University of Nottingham

Jalan Broga
43500 Semenyih
Selangor Darul Ehsan
Malaysia

Tel: +603 (0) 8924 8000
Website: http://www.nottingham.edu.my

Type Course Accreditation Award Course Contact
3 Yrs FT BEng (Hons) Mechanical Engineering 2004 - 2023 Membership, IEng registration and partially meets the requirements for CEng registration enquiries@nottingham.edu.my
4 Yrs FT MEng (Hons) Mechanical Engineering 2004 - 2023 Membership and CEng registration enquiries@nottingham.edu.my
1 Yr FT
MSc Mechanical Engineering 2019 - 2023 Membership and CEng registration with further learning enquiries@nottingham.edu.my


Back to index

The University of Nottingham Ningbo China

The University of Nottingham

199 Taikang East Road
Ningbo
315100
China

Tel: +86(0)57488180000
Website: http://www.nottingham.edu.cn/

Type Course Accreditation Award Course Contact
3 Yrs FT BEng (Hons) Mechanical Engineering 2014 - 2018 Membership and partially meets the requirements for CEng registration admissions@nottingham.edu.cn
3 Yrs FT BEng (Hons) Product Design & Manufacture 2014 - 2018 Membership and partially meets the requirements for CEng registration admissions@nottingham.edu.cn


Back to index

The Nottingham Trent University

The Nottingham Trent University

School of Architecture, Design and the Built Environment,
Burton Street,
Nottingham,
NG1 4BU
Tel: 0115 941 8418
Website: http://www.ntu.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT BSc (Hons) Product Design 2005 - 2020 Membership and RProdDes phillipa.marsh@ntu.ac.uk
3 Yrs FT BSc (Hons) Computer Aided Product Design 2005 - 2009 Membership and RProdDes phillipa.marsh@ntu.ac.uk
1 Yr FT
2 Yrs PT
MSc Advanced Product Design Engineering 2010 - 2015 Membership and further learning towards CEng registration phillipa.marsh@ntu.ac.uk
1 Yr FT
2 Yrs PT
MSc Smart Design 2010 - 2015 Membership and further learning towards CEng registration phillipa.marsh@ntu.ac.uk
4 Yrs FT MSc Advanced Product Design Engineering 2016 - 2020 Membership and further learning towards CTPD phillipa.marsh@ntu.ac.uk
4 Yrs FT MSc Smart Design 2016 - 2020 Membership and further learning towards CTPD phillipa.marsh@ntu.ac.uk

Back to index

Open University

Open University

Engineering Programme
Faculty of Mathematics,Computing and Technology
Walton Hall
Milton Keynes
UK
MK7 6AA
Tel: 01908 653716
Website: http://www.open.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs PT
FT equivalent
BEng (Hons) Engineering 2008 - 2015 Membership and partially meets the academic requirements for CEng registration and fully meets the academic requirements for IEng registration from Graduation 31 January 2011 to 31 December 2015 engineering@open.ac.uk
3 Yrs PT
FT equivalent
BEng (Hons) Engineering Upto - 2019 Membership and partially meets the requirements for CEng registration engineering@open.ac.uk
PT BSc (Hons) Design & Innovation (Design & Engineering route) 2016 - 2020 Membership and RProdDes engineering@open.ac.uk
PT BSc (Hons) Design & Innovation (Environmental route) 2016 - 2020 Membership and RProdDes engineering@open.ac.uk
4 Yrs PT
FT equivalent
MEng (Hons) Engineering 2007 - 2015 Membership and CEng registration from Graduation 31 January 2011 to 31 December 2015. engineering@open.ac.uk
4 Yrs PT
FT equivalent
MEng (Hons) Engineering Upto - 2019 Membership and CEng registration engineering@open.ac.uk
4 Yrs PT
FT equivalent
MSc Engineering 2011 - 2015 Membership and partially meets the academic requirements for CEng registration from Graduation 31 January 2011 to 31 December 2015 engineering@open.ac.uk
4 Yrs PT
FT equivalent
MSc Engineering Upto - 2019 Membership and further learning towards CEng registration engineering@open.ac.uk
6 Yrs PT BEng (Hons) Engineering (top up) Upto - 2019 Membership and IEng registration engineering@open.ac.uk

Back to index

University of Plymouth

University of Plymouth

Faculty of Technology
School of Engineering
University of Plymouth
Drake Circus
Plymouth
PL4 8AA
Tel: +44(0) 1752 586000
Fax: +44(0) 1752 586003
Website: http://www.plymouth.ac.uk/

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs PT
BSc (Hons) Mechanical Design and Manufacture (MDM) 2008 - 2017 Membership and IEng registration alistair.cree@plymouth.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Marine & Composites Technology (MCT) 2008 - 2017 Membership and IEng registration alistair.cree@plymouth.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Marine Sports Technology (MST) 2008 - 2012 Membership and IEng registration alistair.cree@plymouth.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Mechanical Engineering and Computer Aided Design (MECAD) 2008 - 2012 Membership and IEng registration alistair.cree@plymouth.ac.uk

Back to index

University of Portsmouth

Department of Mechanical and
Design Engineering
Anglesea Building
Anglesea Road
Portsmouth
PO1 3DJ
Tel: +44 (0)23 9284 8484
Website: http://www.port.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Innovation 2009 - 2018 Membership and RProdDes petko.petkov@port.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Industrial Design (previously called BSc (Hons) Computer Aided Product Design 2017 - 2018 Membership and RProdDes petko.petkov@port.ac.uk
3 Yrs FT
4 Yrs SW
BSc (Hons) Computer Aided Product Design 2009 - 2016 Membership and RProdDes petko.petkov@port.ac.ukk
3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Modern Materials 2009 - 2013 Membership and RProdDes petko.petkov@port.ac.uk

Back to index

Smallpeice Trust

Smallpeice Trust

27 Newbold Terrace East
Leamington Spa
Warwickshire
CV32 4ES

Tel: 01926 386423
Website: http://www.smallpeice.co.uk

Type Course Accreditation Award Course Contact
4 Days Engineering Experience 2004 - 2006 Endorsement info@smallpeicetrust.rog.uk
4 Days Engineering Skills and Careers 2004 - 2006 Endorsement info@smallpeicetrust.rog.uk
4 Days Engineering Management 2004 - 2006 Endorsement info@smallpeicetrust.rog.uk
7 Months Engineering Careers Foundation Year 2000 - 2005 Endorsement info@smallpeicetrust.rog.uk

Back to index

Southampton Solent University

Southampton Solent University
School of Art and Design
East Park Terrace
Southampton
SO14 ORD
Tel: 023 8031 9000
Website: www.solent.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT BA (Hons) Product Design 2011 - 2022 Membership and RProdDes mark.jones@solent.ac.uk

Back to index

University of Strathclyde

James Weir Building
75 Montrose Street
Glasgow
G1 1XJ
Tel: +44 (0)141 552 4400
Website: http://www.strath.ac.uk

Type Course Accreditation Award Course Contact
4 Yrs FT BEng (Hons) Engineering and Enterprise Management 2005 - 2010 Membership, IEng registration and partially meets the requirements for CEng registration w.j.ion@strath.ac.uk
4 Yrs FT BEng (Hons) Manufacturing Engineering and Technology 2005 - 2010 Membership, IEng registration and partially meets the requirements for CEng registration w.j.ion@strath.ac.uk
4 Yrs FT BEng (Hons) Product Design Engineering 2005 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration w.j.ion@strath.ac.uk
4 Yrs FT BEng Production Engineering and Management 2009 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration w.j.ion@strath.ac.uk
4 Yrs FT BEng Sports Engineering 2005 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration w.j.ion@strath.ac.uk
4 Yrs FT BSc (Hons) Product Design and Innovation 2007 - 2020 Membership, IEng registration and partially meets the requirements for CEng registration w.j.ion@strath.ac.uk
5 Yrs FT MEng (Hons) Engineering and Enterprise Management 2005 - 2010 Membership and CEng registration w.j.ion@strath.ac.uk
5 Yrs FT
MEng Engineering and Enterprise Management with a Diploma in Entrepreneurship 2005 - 2010 Membership and CEng registration w.j.ion@strath.ac.uk
5 Yrs FT
MEng Manufacturing Engineering and Technology 2005 - 2010 Membership and CEng registration w.j.ion@strath.ac.uk
5 Yrs FT
MEng Manufacturing Engineering Technology with a Diploma in Entrepreneurship 2005 - 2010 Membership and CEng registration w.j.ion@strath.ac.uk
5 Yrs FT
MEng Manufacturing Engineering and Technology with a Diploma in Management 2005 - 2010 Membership and CEng registration w.j.ion@strath.ac.uk
5 Yrs FT MEng Product Design Engineering 2005 - 2020 Membership and CEng registration w.j.ion@strath.ac.uk
5 Yrs FT MEng Product Design Engineering with a Diploma in Entrepreneurship 2005 - 2010 Membership and CEng registration w.j.ion@strath.ac.uk
5 Yrs FT MEng Product Design Engineering with a Diploma in Management 2005 - 2010 Membership and CEng registration w.j.ion@strath.ac.uk
5 Yrs FT MEng Production Engineering and Management 2009 - 2020 Membership and CEng registration w.j.ion@strath.ac.uk
5 Yrs FT
MEng Sports Engineering 2011 - 2020 Membership and CEng registration w.j.ion@strath.ac.uk
1 Yr FT
2 Yrs PT
MSc Advanced Manufacturing: Technology and Systems 2015 - 2020 Membership and further learning towards CEng registration w.j.ion@strath.ac.uk
1 Yr FT
2 Yrs PT
MSc Design Engineering 2015 - 2020 Membership and further learning towards CEng registration w.j.ion@strath.ac.uk
1 Yr FT
2 Yrs PT
MSc Design Engineering with Advanced Product Development 2015 - 2020 Membership and further learning towards CEng registration
1 Yr FT
2 Yrs PT
MSc Design Engineering with Sustainability 2015 - 2020 Membership and further learning towards CEng registration
1 Yr FT
2 Yrs PT
MSc Mechatronics and Automation 2015 - 2020 Membership and further learning towards CEng registration w.j.ion@strath.ac.uk
1 Yr FT
2 Yrs PT
MSc Product Design 2015 - 2020 Membership and further learning towards CEng registration w.j.ion@strath.ac.uk

Back to index

University of Sussex

University of Sussex

School of Science and Technology
Department of Engineering and Design
TFMRC
Falmer
Brighton
Tel: 01273 877397
Website: http://www.sussex.ac.uk

Type Course Accreditation Award Course Contact
3 Yrs FT BSc (Hons) Product Design 2008 - 2023 Membership and RProdDes Clare.Harris@sussex.ac.uk
4 Yrs SWBSc (Hons) in Product Design with an Industrial Year 2008 - 2023 Membership and RProdDes Clare.Harris@sussex.ac.uk
4 Yrs FT MEng Engineering Design 2006 - 2009 Membership and CEng registration Clare.Harris@sussex.ac.uk
Back to index

University of Swansea

Singleton Park
Swansea
SA2 8PP
Wales, UK
Tel: +44 (0)1792 295514
Website: http://www.swan.ac.uk/engineering/

Type

Course

Accreditation

Award

Course Contact

3 Yrs FTBEng (Hons) Aerospace Engineering 2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Aerospace Engineering with a Foundation Year2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registration
i.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Aerospace Engineering with a Year Abroad2017 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs SWBEng (Hons) Aerospace Engineering with a Year in Industry2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
3 Yrs FTBEng (Hons) Aerospace Engineering with Propulsion2007 - 2011Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Aerospace Engineering with Propulsion with a Year in Industry2007 - 2011Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
3 Yrs FTBEng (Hons) Mechanical Engineering 2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Mechanical Engineering with a Year in Europe2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Mechanical Engineering with a Year in Industry2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Mechanical Engineering with a Year in North America2007 - 2021Membership and partially meets the requirements for CEng registration i.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Mechanical Engineering with an Integrated Foundation Year2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
3 Yrs FTBEng (Hons) Product Design Engineering 2007 - 2016Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Product Design Engineering with a Year in Europe2007 - 2016Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Product Design Engineering with a Year in Industry2007 - 2016Membership, IEng registration and partially meets the requirements for CEng registration
i.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Product Design Engineering with a Year in North America2007 - 2016Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Product Design Engineering with an Integrated Foundation Year2007 - 2016Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
3 Yrs FTBEng (Hons) Product Design Technology2007 - 2012Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Product Design Technology with a Year in Europe2007 - 2012Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Product Design Technology with a Year in Industry2007 - 2012Membership and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Product Design Technology with a Year in North America2007 - 2012Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FTBEng (Hons) Integrated 4 Year Product Design Technology 2007 - 2012Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
4 Yrs FT

MEng Aerospace Engineering

2007 - 2021

Membership and CEng registration

i.masters@swansea.ac.uk

5 Yrs SWMEng Aerospace Engineering with a Year in Industry2007 - 2016Membership and CEng registration i.masters@swansea.ac.uk
5 Yrs SW

MEng Aerospace Engineering with a Year Abroad

2017 - 2021

Membership and CEng registration

i.masters@swansea.ac.uk

4 Yrs FT

MEng Aerospace Engineering with Propulsion

2007 - 2011

Membership and CEng registration

i.masters@swansea.ac.uk

5 Yrs SW

MEng Aerospace Engineering with Propulsion with a Year in Industry

2007 - 2011

Membership and CEng registration

i.masters@swansea.ac.uk

4 Yrs FT

MEng Mechanical Engineering

2007 - 2021

Membership and CEng registration

i.masters@swansea.ac.uk

5 Yrs SW

MEng Mechanical Engineering with a Year in Industry

2012 - 2021

Membership and CEng registration

i.masters@swansea.ac.uk

4 Yrs FT

MEng Product Design Engineering

2007 - 2016

Membership and CEng registration

i.masters@swansea.ac.uk

5 Yrs SWMEng Product Design Engineering with a Year in Industry2012 - 2016Membership and CEng registration

1 Yrs FT
2 Yrs PT
3 Yrs PT

MSc Aerospace Engineering

2010 - 2021

Membership and partially meets the requirements for CEng registration

i.masters@swansea.ac.uk


Back to index

University of West of England

Built Environment
Bristol Institute of Technology
The Department of Architecture
University of West of England
Coldharbour Lane
Frenchay Campus
Bristol
BS16 1QY
Tel: +44 (0)117 32 83333
Website: http://www.uwe.ac.uk/

Type Course ACcreditation Award Course Contact
FT/ PT/ SW BSc (Hons) Product Design Technology 2011 - 2016 Membership and RProdDes andrew.batchelor@uwe.ac.uk
FT/ PT/ SW
BSc (Hons) Product Design and Innovation 2005 - 2007 Membership and RProdDes andrew.batchelor@uwe.ac.uk
FT/SW BSc (Hons) Product Design and Technology 2017 - 2021 Membership, RProdDes and partially meets the requirements for CTPD andrew.batchelor@uwe.ac.uk
FT/SW BSc (Hons) Product Design and Technology with year in industry 2017 - 2021 Membership, RProdDes and partially meets the requirements for CTPD andrew.batchelor@uwe.ac.uk
FT/SW BSc (Hons) Product (name changed from Creative Product Design) 2017 - 2021 Membership, RProdDes and partially meets the requirements for CTPD andrew.batchelor@uwe.ac.uk
FT/SW BSc (Hons) Product Design with year in industry 2017 - 2021 Membership, RProdDes and partially meets the requirements for CTPD andrew.batchelor@uwe.ac.uk
FT/SW BSc (Hons) Creative Product Design 2013 - 2019 Membership, RProdDes and partially meets the requirements for CTPD andrew.batchelor@uwe.ac.uk

Back to index

All Honours degrees accredited for CEng registration from intake year 1999 meet the requirements for standard route IEng registration and Sydney Accord recognition.

Ask the CEO


Submit Question

If you've got any questions about the IED or our membership process then we'd be more than happy to hear from you. Simply click on the 'submit question' button, fill in the contact form and we'll get back to you with a response as soon as possible.